English  Deutsch  Nederlands 
Shopping cart

Your basket is empty

  English  Deutsch  Nederlands 
Home    Integrated Circuits   Linear IC's   Transistor arrays  THAT320P14, Low Noise Transistor Array, matched, DIP14
THAT320P14, Low Noise Transistor Array, matched, DIP14

THAT320P14, Low Noise Transistor Array, matched, DIP14

4 Matched PNP Transistors on a single, large geometry substrate

  • typical hfe of 75

Low Voltage Noise
  • 0.75 nV/ √Hz

High Speed
  • fT = 325 MHz

Parameter matching
  • 500 μV matching between devices

  • Dielectrically Isolated from each other for low crosstalk
  • High DC isolation to the grounded substrate

Voltage rate
  • 36V Vce

€ 9.85

Article code: THAT320P14

THAT 300, 320 and 340 are large geometry, 4-transistor, monolithic NPN and/or PNP arrays. They exhibit both high speed and low noise, with excellent parameter matching between transistors of the same gender.

Typical base-spreading resistance is 25 Ω for the PNP devices (30 Ω for the low-gain NPNs), so their resulting voltage noise is under 1 nV/√Hz. This makes the 300 series ideally suited for low-noise amplifier input stages, log amplifiers, and many other applications.

The four-NPN transistor array is available in versions selected for Hfe with minimums of 150 (300A) or 300 (300B).

Fabricated in a dielectrically isolated, complementary bipolar process, each transistor is electrically insulated from the others by a layer of insulating oxide (not the reverse-biased PN junctions used in conventional arrays). As a result, they exhibit inter-device crosstalk and DC isolation similar to that of discrete transistors. The resulting low collector-to-substrate capacitance produces a typical NPN fT of 350 MHz (325 MHz for the PNPs).

Substrate biasing is not required for normal operation, though the substrate should be ac-grounded to optimize speed and minimize crosstalk.